Home
How it works
Buy online
About

Contact




Ram-Snap Industry Links:
ICF Tools
ICF Mag
ICF Form Resources


   
How RAM Snap Works
Note: Videos may take 60 seconds to load.

See Our World of Concrete - 2009 Video

Move your mouse over each picture!
Embedded Angles

Place RAM Snap through the pilot
hole.

Draw tight with the RAM Snap Tool
and lock tight with a Lock Block.



Wood Frame Supports

Place RAM Snap through the pilot holes.

Draw tight with the RAM Snap Tool
and lock tight with a Lock Block.

European Distributor independently testing RamSnaps-results showing over 400 lbs (185 kg) before breaking."



The Ram-Snap is a flexible blind fastener that can attach to any irrigular shape as well as re-bar and form ties. The Ram-Snap is easy, and fast to use. Just wrap the Ram-Snap around any secured re-bar or tie, loop the tongue through the eye and pull the Ram-Snap through. Cut a slot in the block with a drywall saw and pull the tongue through. Simple as that!

Secure boards to the forms by drilling a 1/2" hole through the board. Place the board on the form and slide the Ram-Snap through the hole. Use the Ram-Snap tool by applying downward pressure against the board until 3/4" of the Ram-Snap is visable between the board and the tool. Insert the Ram-Snap clip and you are complete! In a matter of seconds you have just secured a board to your block!

Nothing is simpler, easier, or more effective than Ram-Snaps on your jobsite!

Move your mouse over each picture!



RAM-SNAP USES IN THE CONCRETE INDUSTRY


SEE THE MANY USES OF RAM-SNAP!

  • Secure Membranes
  • Installing Embedded Angle
  • Secure Bracing
  • Installing Hollow Metal Door Frames
  • Secure Bucks
  • Installing Weld Plates and Joist Bearing Plates
  • Secure Seams
  • Installing Beam Pockets
  • Secure Lines
  • Installing Perimeter EPS Deck Forms
  • Secure Ledges
  • Secure Electrical Boxes
  • Secure Openings

  •